Flexible Beamkupplungen
grey block
 

FCR - Flexible Beam Coupling

Aluminum Clamp Beam Coupling

Eigenschaften

  • Aluminum
    • Torsionally stiff with dampening
    • Lightweight for low inertia
    • Temperatur Bereich: -40°F to 225°F
  • Stainless Steel
    • High torque and torsional stiffness
    • Corrosion resistant
    • Temperatur Bereich: -40°F to 350°F
  • Multiple beam cuts improve parallel misalignment capabilities
  • Zero backlash
  • Constant velocity
  • RoHS2 and REACH Compliant
  • Maximale Drehzahl:6,000 RPM
  • Bohrungstoleranz: +.001"/–.000"

How to Specify

Part numbers are in the following format with numbers representing sixteenths of an inch:

order fcr

Inch to Metric Bore Combinations

  • Inch to metric bore combinations are available on the F-Series Beam Coupling conversion page
  • For help on inch to metric bore combinations please email

 
 
  Klicken Sie die Artikelnummer an, um alle Details und 3D CAD-Dateien zu erhalten
Part Number Material Large
Bore
B1 (in)
Small
Bore
B2 (in)
Outer
Diameter
OD (in)
Length
L (in)
Clearance
Diam. Max
C (in)
Cap
Screw
Static
Torque
(lb-in)
Torsional
Stiffness
(Deg/lb-in)
Moment
of Inertia
(lb-in²)
Angular
(Deg)
Parallel
(in)
Axial
Motion
(in)
                         
2"); ?>
 
Note 1 Static torque ratings are at maximum misalignment. To obtain dynamic rating, static ratings should be divided by 2 for non-reversing applications and by 4 for reversing applications.
Note 2 Hardware is alloy steel with a black oxide finish and Nypatch® socket head cap screws. Stainless steel hardware is available upon request.
Note 3 Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 4 Coupling torque and torsional stiffness are determined by the largest bore selected.
Note 5 Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Keyways are available on straight bore couplings upon request. Please consult technical support for more assistance.
<< Zurück